Engineering Excellence in Custom Human-Machine Interfaces
Dongguan AXRU Electronics Co., Ltd. is a high-precision manufacturer specializing in custom membrane switches, capacitive touch interfaces, graphic overlays, in-mold decoration (IMD) front panels, silicone rubber keypads, and protective acrylic/tempered glass front panels.
Located in Dongguan, Guangdong, our comprehensive 10,000㎡ production complex houses complete in-house capabilities ranging from precision screen printing and clean-room circuit fabrication to optical bonding, flatbed die cutting, and electrical reliability testing. With over 12 years of specialized engineering experience and a workforce of 121 dedicated technicians, we serve global OEM leaders across medical instrumentation, industrial automation, automotive electronics, and smart commercial appliances.
Intertek Factory Audit Passed
Our operations, equipment capacity, quality controls, and material management have been rigorously verified on-site by Intertek.
Inside Our 10,000㎡ Production Facility
Modern Industrial Plant
10,000㎡ centralized facility in Dongguan, fully equipped for scalable production runs.
Clean-Room Assembly Center
Dust-controlled environment ensuring bubble-free graphic overlays and sterile medical panel assemblies.
Automated Production Bay
Integrated lean assembly lines designed for efficient cycle time and zero-defect tracking.
High-Precision Screen Printing
Pantone color-matched printing for scratch-resistant polycarbonate and polyester graphic overlays.
Multi-Layer Lamination Line
Automated optical registration and lamination of circuit spacers, adhesive transfer films, and metal domes.
Circuit Printing & Curing Tunnel
Conductive silver paste printing with precisely regulated tunnel curing ovens for optimal trace conductivity.
SMD & Metal Dome Integration
High-speed placement of nickel/gold plated metal domes, SMD LEDs, resistors, and sensor pins.
Precision Die Cutting Bay
High-tonnage die presses ensuring sharp cut lines, clean display windows, and exact tail egress geometry.
Comprehensive QC Testing Island
Dedicated inspection stations handling cosmetic audits, tactile consistency, and dimensional checks.
Raw Material Logistics Center
Temperature and humidity controlled storage for 3M adhesives, Autotype PET films, and electronic components.
ESD Packaging & Shipping Hub
Strict anti-static wrapping and reinforced export carton packing to guarantee safe worldwide transit.
In-House Reliability Testing & Validation Laboratory
Every batch produced by Dongguan AXRU Electronics Co., Ltd. undergoes rigorous electrical, mechanical, and environmental validation to satisfy Fortune 500 qualification standards.
100% Verified
100% Electrical Circuit Inspection
Every manufactured keypad undergoes automated electrical testing verifying pin-to-pin loop resistance, insulation continuity, open circuits, and LED functionality prior to packing.
Electrical Quality Assurance
Mechanical Lab
Tensile Testing Machine
Evaluates 180° peel strength, adhesive shear capacity, and tail connection bonding to ensure overlays and FPC tails resist severe industrial vibration and pulling stress.
Adhesion & Tensile Stress
Durability Test
Ink Decolorization Testing Machine
Simulates continuous finger rub cycles, chemical wipe resistance (alcohol, mild solvents, medical sanitizers), and abrasion durability on printed legends and surface finishes.
Solvent & Rub Resistance
Endurance Lab
Key Actuation Life Tester
Pneumatic/motorized cycle testers simulate 1,000,000 to 5,000,000 actuations at high speed, proving long-term metal dome elasticity, contact integrity, and mechanical rebound.
1M - 5M Cycle Durability
Tactile Lab
Key Force & Displacement Tester
Generates high-resolution force-displacement curves to quantify key actuation force, tactile ratio, switch stroke travel, and return spring pressure for consistent tactile response.
Tactile Curve Profiling
Environmental Lab
Programmable Temp. & Humidity Chamber
Subjecting samples to extreme environmental stress tests (-40°C to +85°C, 95% RH) to certify adhesive seal integrity, moisture barrier capability, and anti-delamination stability.
Thermal Shock & Climate Seal
UV Weathering
Yellowing Resistance Testing Machine
Accelerated UV irradiation testing verifies that graphic overlays, clear LCD/LED display windows, and silicone elastomers retain optical clarity without yellowing over years of outdoor exposure.
UV Ageing & Color Fastness
R&D Prototyping
Rapid Sample Making Machine
Digital blade plotter enabling rapid turnaround for engineering samples, custom spacer gaskets, and prototype graphic overlays within 48 to 72 hours without initial tooling expenses.
Fast Prototype Turnaround
Tooling Workstation
Flatbed Die Cutting Machine
Heavy-duty flatbed cutting stations holding tight dimensional tolerances (±0.10mm) for edge registration, display window apertures, and customized cutouts.
Tolerance Control ±0.1mm12+ Years Experience
Specialized exclusively in tactile, capacitive, and graphic HMI components since 2012.
Intertek Verified
On-site inspected production premises, verified equipment roster, and trade records.
100% Quality Audited
Every single tail pin, LED circuit, and tactile dome is electrically checked before carton packing.
Engineering DFM Support
Direct communication with experienced application engineers to optimize stack-up, materials, and cost.